Standard area 2: Practice learning environment
The learning environment must provide opportunities for students to develop their knowledge, skills and behaviours.
Standard area 2: Practice learning environment
Standard: The learning environment must provide education and training opportunities that enable students to develop their knowledge, skills and behaviours across all areas of social work. Practice settings must enable students to gain the required depth and breadth of experience needed in supportive, supervised and safe environments that will allow them to meet Social Work England’s professional standards.
Outcome: Social work courses deliver, in partnership with practice placement providers/employers, practice learning experiences that support readiness to practice at the point of graduation. This includes providing learning opportunities that reflect and allow students to learn from the diversity of the communities they will work with.
Course providers will:
2.1: Ensure that students spend at least 200 days gaining different experiences and learning in practice settings. This may include up to 30 skills days
Each student must have (all of the following):
placements in 2 or more practice settings providing contrasting experiences
a minimum of one placement taking place within a statutory setting
the statutory placement must provide sufficient exposure to statutory social work tasks, involving high-risk decision making and legal interventions, which prepare them for the realities of high-volume, high-risk work
Days spent in practice settings
Students must spend at least 200 days in practice during their course. If needed, up to 30 of these days can be allocated to students developing their skills for practice, also known as ‘skills days’. A practice setting is a setting where social workers are present. It is not appropriate for students to undertake placements where a social worker is not fully engaged in the services being provided.
As outlined within our readiness for professional practice guidance, by the end of their 200 days in practice, students should demonstrate that they competently meet all of the knowledge, skills and behaviours that you have mapped for the practice learning environment. This should be considered in line with your final arrangements for confirming that students have successfully completed 200 days of practice.
Skills days
Students could undertake up to 30 skills days as part of the required 200 days of practice learning. Skills days can be delivered in different ways and in different settings, depending on the route. Skills days should be clearly defined within the course and attendance monitored. They should enable students to develop skills needed for their practice as social workers as outlined in our readiness for professional practice guidance.
Statutory placements
A statutory placement is one that takes place in a setting where social workers carry out duties required by law. These placements must give students direct experience of tasks that involve:
legal responsibilities
high-risk or complex decision-making
statutory interventions
‘High-risk decision-making’ is defined as those decisions which balance care vs control and rights vs risks, and which involve appropriate knowledge, understanding and application of the law in relation to areas such as, deprivation of liberty, best interest assessments, child protection planning, and court proceedings.
‘Complex decision-making’ involves navigating situations with multiple interconnected factors, uncertainty, and potentially conflicting objectives.
We would expect a statutory placement to take place in a local authority or in settings delivering delegated statutory functions on behalf of the local authority. For the purposes of this guidance, that would include NHS Mental Health Trusts.
Settings must involve a sufficient amount of work on either s17 and s47 cases (under the Children Act 1989) or on delivering requirements of the Care Act 2014, Mental Capacity Act 2005 and Mental Health Act 1983.
The setting must offer a sufficient number of statutory social work tasks which:
involve experience of high-risk or complex decision-making
require case records to be updated by the student, under appropriate supervision
require students to undertake assessments of need
require students to respond to and participate in plans to address need, harm, neglect or abuse
expect students to promote positive and planned change
undertake appropriate legal interventions
By ‘sufficient numbers of statutory social work tasks’, we mean that students must be involved in enough statutory tasks to enable them to experience and understand the realities and impacts of high volume, high-risk work, while under appropriate supervision, within a statutory environment. We do not set a minimum number of statutory tasks. Instead, we will consider this within the overall context of the placements you provide.
Course providers may identify a setting not referenced in the examples above. It is the responsibility of the course provider to apply a robust process to assess whether the placement can be defined as statutory, using the guidance in relation to statutory tasks outlined above. All students must undertake at least one placement which provides them with experience of statutory social work tasks.
When you provide Social Work England with a pass list, you are confirming that each student on that list has successfully met the 200-day placement requirements set out in this standard and there are no exceptions.
Contrasting experience
To ensure that students gain sufficient experience to work in any setting, their placements should offer different, contrasting learning opportunities. For example:
a student could work in a local authority setting in one placement and in the private, voluntary or independent sector for their other placement
a student could work in child protection for one placement and with children with different needs (such as in a children’s disability team) for their other placement
a student could work with children in one placement and with adults in their other placement
Private, voluntary and independent sector (PVI)
We recognise that some organisations within the PVI offer placements that deliver statutory work and that they provide valuable learning experiences for students.
A placement at a PVI can be defined as being in a statutory setting if:
the local authority has delegated a statutory function to the PVI and
there is opportunity at the PVI for students to be directly involved with children and families who are subject to s17 and s47 (under the Children Act 1989) and/or
there is opportunity at the PVI for students to be involved in delivering requirements of the Care Act 2014, Mental Capacity Act 2005 and Mental Health Act 1983 such as:
carers’ charities which have been commissioned by the local authority to undertake carers’ assessments
advocacy organisations that employ individuals to work as independent mental capacity advocates
hospices that require individuals to undertake Mental Capacity Act assessments and/or
there is opportunity at the PVI for students to be involved in court-ordered work or work with offenders
In addition to the above, a placement in a PVI should require case records to be updated by the student, under appropriate supervision.
Mandatory attendance
It is mandatory for students to complete the 200 days in practice-based learning, including any skills days if used. Placement patterns may vary across course providers but regardless of route, the 200 days must be clearly identified and monitored for attendance.
A placement day should mirror the usual working pattern of the placement provider, therefore working patterns may vary depending on the placement provider. Ideally, a placement day is usually taken to mean no less than 6 hours (plus a lunch break), but this should be considered on a case-by-case basis.
Shared placements
You may wish to consider placements that are shared between an organisation that meets the statutory setting or delegated statutory setting criteria, as set out above, and an organisation that does not. This is also known as a ‘hub and spoke’ model. Both components of the placement should be planned in collaboration to ensure cohesion in learning and assessment.
The placement must be overseen by a single practice educator to ensure appropriate learning opportunities, sufficient number of statutory tasks and consistent development for the student. Workplace supervision needs to be available in both settings to support the student to practice safely.
Onsite/offsite placements
You should be clear about your expectations in relation to physical attendance at placements and whether hybrid or remote working is permitted. We expect students to spend a minimum of 60% of their placement time working in an in-person manner. This should include face to face working with colleagues and service users.
We would not expect students to be working without in-person support. You should have clear processes for agreeing and monitoring student’s face to face working with placement providers. We do not specify how and where you undertake monitoring, but you must be able to evidence your processes to do so.
Where students are not working on site, we expect that they remain fully engaged in placement-related activity. This might include engaging in virtual meetings with colleagues. These may be meetings focused on specific cases, to engage in supervision, facilitated case discussions or regular team meetings with other social workers and relevant colleagues in their team.
We also expect that time which is not spent onsite in a face-to-face manner may support the completion of administrative tasks, such as planning or writing case records.
We would expect all hybrid working arrangements to be overseen by a practice educator or work-based supervisor and the activities undertaken during remote/offsite working should be planned and intentional.
Those who need reasonable adjustments would be exempt from the 60% requirement if an adjustment is identified and appropriate. In such cases, course providers should be able to evidence how agreements have been reached and provide details of how they are assured that adaptations still enable students to experience a high-quality placement.
In the exceptional situations where placements are offered in services that are unable to provide the expected 60% in-person working arrangements, there needs to be evidence as to why the placement is appropriate and how it meets the learning outcomes and knowledge, skills and behaviours. There would also need to be clear support identified to ensure appropriate supervision.
Simulated placements
We recognise that there can be difficulties in sourcing placements for students, and while simulation can be a valuable educational tool, it cannot replicate the complexity, unpredictability and relational aspects of real-world social work practice. Therefore, the use of simulated placements are not accepted as part of the 200 days practice learning requirement under this standard, with the exception of simulated learning as part of skills days (if used).
Consideration of students’ lived experience
You should be aware that factors relating to students lived experience could impact their placement experience. Placement planning should be collaborative and trauma-informed, ensuring the student feels safe and supported in their learning environment. You should consider sourcing alternative placements to avoid a student completing a placement in a setting where they have received, or currently receive services, as appropriate.
Fast track and apprenticeships routes
We acknowledge that on some course routes, students are working within a practice learning environment throughout the course. We require the 200 days of practice-based learning to be clearly defined with identified learning opportunities in line with the guidance. This should be communicated clearly to students and staff involved in practice-based learning, both verbally and through supporting placement documentation.
2.2: Provide practice learning opportunities that enable students to gain the knowledge, skills and behaviours necessary to develop and meet the professional standards
Placements should provide suitable learning opportunities to allow students to gain the knowledge, skills and behaviours necessary to meet the professional standards. These knowledge, skills and behaviours are outlined within our readiness for professional practice guidance.
You should have documentation that sets out administrative and practical information about the placement and what the student should expect to do and learn during the placement.
Placement content
Placement content will vary between providers. But it is important that you have plans and documentation to support your agreements with placement providers. These should show how and when students will have learning opportunities which allow them to develop and demonstrate the necessary knowledge, skills and behaviours. These are outlined within our readiness for professional practice guidance.
Practice educators and placement supervisors should use this documentation to support and monitor students, and that students use it to guide their own learning.
The level of responsibility that students will have when undertaking these opportunities will vary depending on their skills and experience. More details about students’ responsibilities are listed below in 2.4.
Placement audit
You must ensure that placement opportunities are audited through regular ongoing quality assurance processes. This will ensure that students gain experience in practice settings that prepare them to meet our professional standards, register with us and practise as social workers.
2.3: Ensure that while on placements, practical arrangements are in place to ensure that students have appropriate induction, supervision, support and access to resources
Documentation in place to support placement learning, such as a placement learning agreement (PLA), should provide details of the requirements of the standard.
You may wish to consider including the following within agreements:
the names of the staff involved in the placement, including their contact details
practical and administrative information about the placement, including the main policies that the student needs to be aware of and abide by
details relating to training on the use of organisational systems
the structure in place that will enable the learning outcomes to be met, for example a timetable setting out when and how students will have access to practice learning opportunities to enable them to achieve the learning outcomes
details of induction and ongoing supervision arrangements
any significant dates and targets that the student needs to be aware of or meet
This document could form part of the agreement you have with placement providers which is covered in more detail under standard 3.2.
Induction
Induction is a key aspect of ensuring that students can safely undertake placements. You should expect placement providers to offer a full induction to ensure all students have the information needed so they can engage with their placement. You may wish to include this requirement in your agreements with placement providers.
Induction could include:
familiarisation with the main learning environment(s)
meetings with practice educators and other staff who will be supporting or interacting with students
provision of a structure chart for the placement organisation
granting access for students to records and IT systems, as appropriate
provision of information about the relevant policies that the students need to comply with and where to find them, such as:
information systems use (including use of artificial intelligence (AI))
data protection
health and safety
consent
confidentiality
how to report sickness and other absence
dress code behaviour in the workplace
reporting concerns
whistleblowing
provision of information about the delivery of the placement, such as timetables and learning locations if the placement includes more than one learning environment
Social work supervision
Students must be supervised appropriately during their placement to ensure the safety of people with lived experience of social work and their own safety. Appropriate social work supervision is also key to ensuring that students get a good learning experience and can access appropriate learning opportunities.
The learning and development of each student on a placement should be overseen by a named practice educator who is a registered social worker and has overall responsibility for the student’s supervision.
Generally, we would expect supervision to take place on a weekly basis. The practice educator should determine the degree of social work supervision required, particularly if a student requires any special arrangements for their supervision or needs a greater amount of supervision than is generally provided.
Work-based supervisors
In some cases, the day-to-day monitoring and supervision of a student during placement may not be provided by the practice educator, but by a work-based or on-site supervisor (who may or may not be a registered social worker). This supervisor is defined as someone who works in the placement setting and who will be in frequent contact with the student.
Where a work-based supervisor is used, the student must also have an allocated practice educator who remains responsible for supporting the placement and assessing the student. A work-based social work supervisor may therefore offer task-based supervision and tuition, whereas the practice educator may focus on supporting the student to make links between theory and practice, reflect on the work undertaken and consider their ongoing learning needs and professional development.
You may find it helpful to set out in your agreement with placement providers the role and responsibilities of work-based supervisors, which might include:
having a role in the student’s induction and helping them settle into the placement setting
working closely with the student, providing feedback on their progress and supporting their learning
understanding the learning outcomes for the placement (and ideally the whole course, for context) and the learning needs of the student they are supervising
liaising with the practice educator if any concerns about a student arise
being clear about the difference between social work supervision and management oversight, and any tripartite arrangements
Access to resources
Students should have appropriate access to resources to allow them to undertake learning opportunities during the placement. This includes access to IT systems, records and relevant documentation. Students should also have access to appropriate learning resources within the placement environment, such as books and journals.
Students should have an appropriate space to work, such as at an allocated desk or area in an office environment.
Fast track and apprenticeships routes
For students who are studying on an apprenticeship or specialist route, there is an expectation that they receive the same level of induction, supervision and support as those on traditional routes. You should ensure that placement parameters are clearly defined so that all parties recognise it as a learning environment.
Students and staff should be clear about the arrangements in place for tripartite meetings and off the job learning.
2.4: Ensure that on placements, students’ workload and responsibilities are appropriate for their stage of education and training
Workload
An appropriate workload for the student should be agreed between the practice educator and the work-based supervisor. They should review the student’s workload throughout the placement to ensure it is meeting the student’s learning needs.
A placement day should mirror the usual working pattern of the placement provider, therefore working patterns may vary depending on the placement provider. However, students are not part of the normal staff team. They should not be asked to cover staff shortages, absences, or respond to pressures being experienced in the team or setting, unless doing so is consistent with meeting their learning needs.
Allocation of workloads for students should not, therefore, be determined by the volume of work within a team or setting but should be at the professional judgement of the practice educator and work-based supervisor and appropriate to the student’s level of capability and agreed learning needs.
Responsibilities
You should ensure that students work within a scope of practice that is appropriate to their level of skills and experience.
The level of responsibility that students have when undertaking learning opportunities will vary depending on whether they are doing their first or final placement, and the stage they are at within that placement. At no point, should a student have sole responsibility or carry out social work tasks independently.
A student’s responsibility should gradually increase, under appropriate supervision, as their knowledge, skills and behaviours develop. The level of supervision and responsibility given to a student should be tailored to that individual and their needs. The progressive thresholds, outlined within our readiness for professional practice guidance, provide further guidance on developing competence.
Fast track and apprenticeships routes
Course providers should have arrangements in place to ensure that students who are placed in settings linked to their substantive post have the same experience as other students.
There should not be an assumption that a student can take additional responsibility due to their familiarity with a setting, nor should students be expected to complete work that is linked to a previous/substantive post.
2.5: Ensure that students undergo assessed preparation for direct practice to make sure they are safe to carry out practice learning in a service delivery setting
When designing your approach under this standard, you should refer to the knowledge, skills and behaviours statements within our readiness for professional practice guidance.
It is important to ensure the safety of people with lived experience of social work who meet students during placements. People’s safety must not be put at risk by students’ performance, lack of knowledge, health or conduct.
Students should be aware of how they should communicate and interact with people with lived experience of social work before their placement starts.
Health, suitability and Disclosure and Barring Service (DBS) checks
As a part of your admissions process, you will have carried out a criminal record check with the DBS (or for students on apprenticeships or other employment-based routes, ensured that a valid DBS check is held by the employer). However, placement providers may have criminal records check requirements that are different to your own. They may decide a further DBS check is necessary for some (or all) students for them to undertake the placement safely.
If a placement provider does not feel a student is safe to undertake the placement because of their DBS check (despite the student passing the DBS check to be admitted to your course), then an alternative placement for that student should be identified. In this instance, you may also wish to consider whether your requirements for criminal records checks at admission are appropriate and safe for students entering a social work course.
If the DBS check carried out by the placement provider reveals additional/new information about the student, you must consider their suitability to continue the course in accordance with standard 5.3.
Additionally in line with the requirements of standard 5.3, you should also have processes in place to reassess students’ suitability for social work practice. This may include requesting a self-declaration to confirm that a student’s circumstances have not changed ahead of placement.
You should check that the student does not have any health conditions that could impact them safely undertaking the placement. You may need to consider making specific arrangements for students with health conditions or reasonable adjustments for students with disabilities. This will enable them to safely undertake the placement.
Student behaviours
You should ensure that you have assessed that students are developing competency in the behaviours outlined within our readiness for professional practice guidance. You should do this prior to students commencing their first placement.
Students should also be made aware of the expectations of being present in an employment and service delivery setting. Expectations could include (any of the following):
following the required policies and protocols
maintaining good time keeping and being punctual
following instructions and being able to receive feedback from practice educators and other staff
being courteous to practice educators and other staff
professional integrity
this should also include the employability and work-based skills as outlined in standard 1.1
Assessment of readiness for practice
Before starting their first placement, you must assess each student’s preparedness to safely undertake practice learning. Assessing students’ preparedness could include the following:
testing students’ knowledge of the theoretical learning they have completed so far on the course, for example through a written examination
testing students’ basic understanding of the professional standards for social workers, and associated knowledge, skills and behaviours, through observed small group discussions, reflective essays, presentations or research projects
observing students in simulated service delivery settings engaging with people with lived experience of social work, for example through role play scenarios
Alongside formal assessment mechanisms, you may choose to ask teaching staff for their views on each student’s preparedness and discussing any areas of concern.
Fast track and apprenticeships routes
Where students are on a work-based qualification, you must ensure that there is still a formal process in place for assessing students’ readiness for professional practice. This includes where placement takes place within their usual place of work.
2.6: Ensure that practice educators are on the register and that they have the relevant and current knowledge, skills and experience to support safe and effective learning
Registration
You should ensure and be able to demonstrate that all practice educators, whether employed by yourselves, a local authority or acting as an independent practice educator, are registered with Social Work England at the point of taking a student on placement.
Training
The role and responsibilities of the practice educator are set out in the Practice Educator Professional Standards (PEPS) for social work. This was published by the British Association of Social Workers (BASW) in 2022.
Practice educators are expected to have completed a training course on practice education that is (both of the following):
aligned to the PEPS
relevant to the level of student they are working with (such as students on placement 1 or placement 2)
We expect that all new practice educators are trained. This should be followed up with regular refresher training and support. We understand that it is the responsibility of the employer providing the placements, rather than you as education provider, to train practice educators.
We recognise some course providers deliver their own training for practice educators. Where this is not the case, you will need to have agreements in place with your placement providers so they can provide this training.
Currency
You should work with employers to ensure that practice educators are sufficiently skilled and experienced and maintain their currency as practice educators.
You should have a process that checks that practice educators are supported, trained and able to keep their practice up to date.
You should evaluate the effectiveness of the processes in place through your evaluation of placements.
It is important that you have a shared understanding with employers of the role and responsibilities of practice educators and the time that they need in their working day or week to effectively carry out the role and promote the value of this role with employers.
Engagement with practice educators
You should engage directly with practice educators for a range of purposes which could include:
providing information and training in the curriculum, including assessments, and the expected learning outcomes for students while on placements
providing training in teaching competencies, such as communication, giving feedback and principles of equality, diversity and inclusion
supporting their continuing professional development
advising them about local and national support networks and how to access them
engage them in the development and management of the course and individual placements
seeking and providing feedback on placements
bringing all your practice educators together centrally to allow individuals to network and share advice and experiences
annual briefings or refresher sessions to bring practice educators and on-site supervisors up to date with the course
mentorship schemes for practice educators, particularly for those new to the role or to your course
2.7: Ensure that policies and processes, including for whistleblowing, are in place for students to challenge unsafe behaviours and cultures and organisational wrongdoing, and report concerns openly and safely without fear of adverse consequences
The knowledge, skills and behaviour statements in our readiness for professional practice guidance outline that students should:
understand how to recognise organisational wrongdoing and cultures of unsafe practice
know when to whistle blow, raise concerns and seek support
challenge decisions, actions or behaviours which are not in the best interests of people receiving services
Challenging unethical practice and reporting concerns is a key element of the professional standards for social workers. However, some students may find it difficult to challenge unsafe behaviours and cultures and organisational wrongdoing.
You should check that the appropriate policies and processes are in place at your placement providers. You should also consider where these are referenced within placement documentation.
Students should be told about these policies and procedures at induction. You should support students to raise concerns. You should make sure that students know who to report their concerns to, and how these concerns will be considered and acted on.
You should have your own concerns process and whistleblowing policy. These should be designed to make sure that students are not penalised for raising concerns. Other support for students may include:
training on raising concerns and the importance of being open when things go wrong
dedicated reporting or communication methods for students to raise concerns
advice from members of staff when situations arise which may be cause for concern
Your concerns process should make sure that, where necessary, the concern will be forwarded to another appropriate person or organisation.
Fast track and apprenticeships routes
Due to fast track and apprenticeship routes having additional factors such as employment contracts, it may be best for the course leader or other managers at your organisation to deal with concerns.
We recognise that concerns will not always be dealt with in the same way, and the appropriate way to deal with a concern is likely to depend on the nature of the concern and where it originates from.
Regardless of the route and process in place, we expect the requirements of the standard to be met.
2.8: Provide information to students about parts of the course where attendance is mandatory
You should ensure that students attend and positively engage with the parts of the course that are essential to gaining the necessary knowledge, skills and behaviours. This will ensure that students are ready to meet the professional standards by the time they qualify. You should identify the parts of your course where attendance is mandatory and make this clear to students.
Students must spend at least 200 days in practice over the duration of their course. Up to 30 of these days can be allocated to students developing their skills for practice, also known as ‘skills days’. It is mandatory for students to attend all placement days, including any skills days (where these are provided).
You must have systems in place to monitor attendance in all settings and to take appropriate action if students fail to attend the mandatory parts of the course. If a student has genuine reasons for failing to attend a mandatory part of the course, you must make arrangements so they can gain this knowledge before they complete the course.
Students should also be made aware of any consequences of missing mandatory parts of the course. In some cases, it may be appropriate to state that attendance on specific days or modules is mandatory. In other cases, it may be more appropriate to expect a student to achieve an average attendance for the duration of the course.
Poor attendance can be a sign that a student is experiencing health concerns. Students should be encouraged to declare any health concerns that are affecting their attendance. Poor attendance can also indicate an issue with a student’s character or conduct or can be indicative of wider personal issues. You should consider this when investigating poor attendance and take appropriate action if a student’s character or conduct gives cause for concern.
Skills days
It is not mandatory that you offer skills days. But if you choose to offer them, then these are in place of a day in placement. Therefore, these need to be equivalent to a day in placement in terms of length and learning. If students fail to attend, you must ensure you have mechanisms in place to allow them to make up the skills day.